The Arduino 9 Axes Motion Shield is based on the BNO055 absolute
orientation sensor from Bosch Sensortec GmbH.
The BNO055 is a System in Package (SiP), integrating a triaxial
14-bit accelerometer, a triaxial 16-bit gyroscope with a range of 2000
degrees per second, a triaxial geomagnetic sensor and a 32-bit
microcontroller running the BSX3.0 FusionLib software. The sensor
features three-dimensional acceleration, yaw rate and magnetic field
strength data each in 3 perpendicular axes. It also provides the
sensor fusion signals such as
* Euler angles
* Rotation vector
* Linear acceleration
* Gravity vector
In addition, it incorporates an intelligent interrupt engine, which
allows for triggering interrupts based on
* slow or no motion recognition
* any motion (slope) detection
The shield is TinkerKit compatible, which means you can quickly
create projects by plugging TinkerKit modules to the board.
* Operating Voltage: 5V
* Power Consumption: 50mW
Input and Output:
The shield features several TinkerKit input/output and communication
interfaces. Connecting TinkerKit modules can simplify the creation of
a project or a prototype.
The on-board connectors are :
* 2 TinkerKit Inputs: IN2 and IN3 (in white), these connectors are
routed to the Arduino A2 and A3 analog input pins.
* 2 TinkerKit Outputs: OUT5 and OUT6 (in orange), these connectors
are routed to the Arduino PWM outputs on pins 5 and 6.
* 2 TinkerKit TWI: these connectors (4-pin in white) are routed on
the Arduino TWI interface. Both connect to the same TWI interface to
allow you to create a chain of TWI devices.
The Arduino 9 Axes Motion Shield is compatible with Uno, Yn, Leonardo,
Ethernet, Mega and Due boards. When using the Arduino 9 Axes Motion
Shield, be sure to solder the Interrupt bridge and Reset bridge in the
correct position depending on the board used. See table:
In the Arduino IDE you will find the following examples, go to File ->
Examples of Arduino IDE, under NAxesMotion, there are 4 sketches for
the use of 9 Axes Motion Shield:
Example code to stream Accelerometer data
Example code to describe the Bare Minimum
Example code to stream Euler data
Example code of a game to demonstrate the Any motion and No motion
Interrupt features … more
|Product type||Electronics kit|
If you wish to learn more about this product, please visit the manufacturer's website or contact us: email@example.com
Warranty 24 month Bring-in
Limited right of return
Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty
Please use our simplified warranty process to view the warranty period as well as any warranty extensions you may have purchased. This will ensure that your return or warranty case is processed quickly and effectively.
Information subject to change.
Have you tested this product? Share your opinion with the digitec community.Rate product
You're not connected to the Internet. Please check that your connection is enabled to keep browsing the site.