You're not connected to the Internet.
CHF 24.90

Arduino 4 Relays Shield

Art-Nr 5998102
 approx. 9-11 days Currently > 5 piece(s) in stock at the supplier

Availability

  • approx. 9-11 days
    Currently > 5 piece(s) in stock at the supplier

If ordered immediately.
Information subject to change.

View details

No ratings have been submitted yet for this product.

Rate this product

Description

The Arduino 4 Relays Shield is a solution for driving high power loads
that cannot be controlled by Arduino's digital IOs, due to the current
and voltage limits of the controller.

The Shield features four relays, each relay provides 2 pole changeover
contacts (NO and NC); in order to increase the current limit of each
output the 2 changeover contacts have been put in parallel. Four LEDs
indicate the on/off state of each relay.

Summary

Operating Voltage

5V

Coil current consumption

140 mA (with all releays on, about 35 mA each)

Single pole chargeover contact maximum current

@ 30 V DC 2A

Maximum load voltage

48 V

Maximum switching capacity

60 W

Power

The shield doesn't need external power: it will be provided by the
base board, through the 5V and 3.3V pins of the Arduino board used as
base.

Input and Output

The relays are controlled by the following Arduino board pins:

* Relay 1 = Arduino pin 4
* Relay 2 = Arduino pin 7
* Relay 3 = Arduino pin 8
* Relay 4 = Arduino pin 12

The shield features several TinkerKit input/output and communication
interfaces. Connecting TinkerKit modules can simplify the creation of
a project or a prototype.

The on-board connectors are :

* 2 TinkerKit Inputs: IN2 and IN3 (in white), these connectors are
routed to the Arduino A2 and A3 analog input pins.
* 2 TinkerKit Outputs: OUT5 and OUT6 (in orange), these connectors
are routed to the Arduino PWM outputs on pins 5 and 6.
* 2 TinkerKit TWI: these connectors (4-pin in white) are routed on
the Arduino TWI interface. Both connect to the same TWI interface to
allow you to create a chain of TWI devices.

Physical Characteristics

The maximum length and width of the 4 Relays Shield PCB are 2.7 and
2.1 inches respectively. Four screw holes allow the Shield to be
attached to a surface or case. Note that the distance between digital
pins 7 and 8 is 160 mil (0.16"), not an even multiple of the 100 mil
spacing of the other pins.

Compatibility

The shield is compatible with all the Arduino boards, 5V and also 3.3V
standards.
more

Specifications

Click 'show more' to display specifications.

General information

Manufacturer Arduino
Product type Electronics kit
Item number5998102
Manufacturer no.A000110

Please click directly on the incorrect data to access the registration form.

Alternatively, you can register a generic error-report (wrong picture, unsuitable accessories, etc.)

Cancel

Report incorrect data

Correction suggestion

Comment

Report incorrect data

If you wish to learn more about this product, please visit the manufacturer's website or contact us: digitec@digitec.ch

Warranty & right to return

Warranty 24 month Bring-in

Limited right of return

Warranty and return

Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty

Please use our simplified warranty process to view the warranty period as well as any warranty extensions you may have purchased. This will ensure that your return or warranty case is processed quickly and effectively.

Availability

Mail delivery

 Expected delivery time: approx. 9-11 days
Currently > 5 piece(s) in stock at the supplier

Collection

All locations

 Expected delivery time: approx. 9-11 days
Currently > 5 piece(s) in stock at the supplier

If ordered immediately.
Information subject to change.

Customer questions and answers

No questions so far.

Do you have a question? Ask the digitec community.

Ask a question

Ask other customers about product properties, performance or use.

Customer ratings

This product has not yet been rated.

Have you tested this product? Share your opinion with the digitec community.

(0)
Rate product
Arduino 4 Relays Shield Arduino 4 Relays Shield