You're not connected to the Internet.
Align T-REX 700L Dominator TOP (Kit) Actual product image

Align T-REX 700L Dominator TOP (Kit)

Description

The T-REX 700L Dominator TOP Super Combo BEASTX is a high-quality professional helicopter which convinces with its robust materials, good flight stability and its breathtaking 3D characteristics. The matt lacquered carbon frame with aluminium reinforcement offers you a high degree of stability, lightness and convinces through easy maintenance thanks to its well thought-out design.
Thanks to the tail servo mount inside the frame, the centre of gravity has been centralised, which increases the 3D flight capability. In combination with the powerful 850MX brushless motor, this results in breathtaking flight manoeuvres.
Pitch-controlled helicopters generally always rotate at the same speed. To climb or sink, the angle of attack of the rotor blades is changed. The advantage of this method is that the helicopter reacts without delay. This allows you to perform challenging aerobatics and 3D manoeuvres, but requires some knowledge. Therefore pitch controlled models are mainly suitable for professional pilots.

Kits are model components which must be assembled and possibly supplemented by additional parts. This allows you a variety of configuration options - but also requires a certain amount of previous knowledge in model sports.

Scope of delivery:
1x T-REX 700L DOMINATOR
1x Microbeast PLUS Flybarless system
1x 3K Carbon Fiber Tail Boom
1x 700 Carbon Fiber Blades
1x 850MX Brushless Dominator Motor(490KV)
1x Castle EDGE HV 160 Brushless ESC
3x BL815H Digital Servos
1x BL855H Digital servos
1x 105mm 3K Carbon Fiber Tail Blades
1x building instruction

Additionally required:
1x transmitter (7 channel or more)
1x receiver (7 channel or more)
2x 6S Li-Po 4500 ~ 5200mAh
1x 2S Lipo 1800mAh ~ 2200mAh
more

Specifications

Key specifications

VariantKit

General information

Manufacturer Align
Product type RC aircrafts
i

RC aircrafts

The RC airplane is a remote controlled model of an airplane. Built for different requirements, the RC models are differentiated according to the controllable channels: the more channels, the more controllable functions. Depending on the model, the aircraft is powered by wind, an electric motor, a combustion engine or a turbine.
There are take-off and landing runways for model aircraft from various local model flying associations. Especially beginners are recommended to fly together with experienced pilots.

Item number5738540
Manufacturer no.RH70E14X

Colour

Colour group
Multicoloured
i

Multicoloured

The product is multi-coloured

Material

Material group
Metal
i

Metal

https://de.wikipedia.org/wiki/Metalle

In 3D printing, ABS or PLA is usually used as the base material, to which a mixture of metal powder (copper, stainless steel, iron, bronze or brass) has been added. The squeezed out objects look and feel like metal.

,
Plastic
,
Carbon
i

Carbon

Carbon-fiber-reinforced polymer or carbon-fiber-reinforced plastic (CFRP or CRP or often simply carbon fiber), is a very strong and light fiber-reinforced polymer which contains carbon fibers. The polymer is most often epoxy, but other polymers, such as polyester, vinyl ester or nylon, are sometimes used. The composite may contain other fibers such as Kevlar, aluminium, glass fibers as well as carbon fiber.

More information...

Target group

Level
Advanced
,
Expert

Application range

Flight range
Outdoor
i

Outdoor

Describes activities or localities that are located outside.

More information...

Aircraft properties

Aircraft type
helicopters
Helicopter size
700s
Modelling variant
Kit
i

Kit

A kit of all parts, mostly without electronics (except specified)

Control functions
roll
,
pitch
Gyroscope
Yes
Flybarless system
Yes
Wingspan / rotor diameter
158.20 cm

Rotor properties

Number of rotor blades
2
Number of rotors
2

Engine properties

Engine type
Brushless electric motor
i

Brushless electric motor

Brushless DC electric motor (BLDC motors, BL motors) also known as electronically commutated motors (ECMs, EC motors) are synchronous motors that are powered by a DC electric source via an integrated inverter/switching power supply, which produces an AC electric signal to drive the motor. In this context, AC, alternating current, does not imply a sinusoidal waveform, but rather a bi-directional current with no restriction on waveform.

More information...

Additionally required (not included)

Additionally required (not included)
i

Additionally required (not included)

For the operation of the product required, but not included.

Accumulator
,
Battery charger
,
RC transmitter
,
Recipient

Product dimensions

Length
135 cm
Height
36 cm
Weight
3.31 kg

Please click directly on the incorrect data to access the registration form.

Alternatively, you can register a generic error report (wrong picture, unsuitable accessories, etc.)

Cancel

Report incorrect data here. The specifications may also include unverified machine translations. Thank you for reporting translation errors to translations@digitecgalaxus.ch.

Correction suggestion

Comment

Report incorrect data here. The specifications may also include unverified machine translations. Thank you for reporting translation errors to translations@digitecgalaxus.ch.

Returns and warranty

Warranty 24 month Bring-in
30-day right of return
i

30-day right of return

Unfortunately, we cannot accept a product if it is damaged, incomplete or missing its original packaging.

Returns and warranty

Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty

Please use our simplified process, which shows the correct warranty period and takes into account any warranty extensions you have purchased. This ensures that your return or case can be processed as quickly and easily as possible.

Availability

Mail delivery/Collection

Currently unavailable. Delivery date unknown.
We do not have any information regarding the delivery date. It will be shown as soon as it's known.

Information subject to change.

Matching accessories

RC aircraft accessories

  • Black Shark III 700 F3C Rumpf
  • Black Shark III 700 F3C Rumpf
  • Black Shark III 700 F3C Rumpf
CHF 648.–
Align Black Shark III 700 F3C Rumpf

Availability

  • approx. 9 – 11 days
    Currently 1 piece(s) in stock at the supplier

If ordered immediately.
Information subject to change.

View details

+3

Questions about this product

No questions so far.

Have a question? Ask the digitec Community.


What's your question to the Community?

The Community terms and conditions apply.
If you have any questions about your order, please contact the Customer service.

Product ratings

Your rating

To what extent does the product meet your expectations?

Align T-REX 700L Dominator TOP (Kit) Align T-REX 700L Dominator TOP (Kit)