If you have a modern smart phone you may have noticed that it comes
with built in wireless charging capability called 'Qi charging.' Qi is
a trademark name for a thin and smart inductive charging system. Many
large gadget companies have standardized on Qi, which means it's easy
to find a charging dish and we thought it might be cool if your
Arduino project can recharge itself wirelessly.
This is a super simple Qi transmitter. It will work with any standard
Qi charger receivers. You just connect the board to a 5v power supply
- either through a micro USB port - then put your device w/ Qi receive
onto the base. If you want to 'share' the microUSB power connection,
you can also connect direct to the USB-A port
Maximum output is around 5W which is good for most smart phones,
basically 1000mA charge at 5V on the other side of the wireless
connection. It has a charging distance of 2-8mm, works with all our Qi
charge receivers. You can only use one receiver per transmitter so if
you want to charge two Qi devices at once, you'll need 2 transmitters.
* Input: 5V
* Input Current: 2A
* Maximum output power of 5W
* Operating Frequency: 100-200Khz
* Charging Distance: 2-8mm
* Charging Plate Dimensions: 53mm x 53mm x 4mm / 2.1" x 2.1" x 0.2"
* PCB Dimensions w/ Components: 55mm x 37mm x 6mm / 2.2" x 1.5mm x
* Weight: 47g … more
|Product type||Electronics module|
If you wish to learn more about this product, please visit the manufacturer's website or contact us: email@example.com
Warranty 24 month Bring-in
Limited right of return
Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty
Please use our simplified warranty process to view the warranty period as well as any warranty extensions you may have purchased. This will ensure that your return or warranty case is processed quickly and effectively.
Information subject to change.
Have you tested this product? Share your opinion with the digitec community.Rate product
You're not connected to the Internet. Please check that your connection is enabled to keep browsing the site.