If you've been diggin' our monochome OLEDs but need something bigger,
this display will delight you. These displays are 2.7" diagonal, and
very readable due to the high contrast of an OLED display. This
display is made of 128x64 individual white OLED pixels, each one is
turned on or off by the controller chip. Because the display makes its
own light, no backlight is required. This reduces the power required
to run the OLED and is why the display has such high contrast; we
really like this graphic display for its crispness!
The driver chip, SSD1325 can communicate in two ways: 8-bit or SPI.
Personally we think SPI is the way to go, only 4 or 5 wires are
required. The OLED itself requires a 3.3V power supply and 3.3V logic
levels for communication. We include a breadboard-friendly level
shifter that can convert 3V or 5V down to 3V, so it can be used with
5V-logic devices like Arduino.
The power requirements depend a little on how much of the display is
lit but on average the display uses about 50-150mA from the 3.3V
supply. Built into the OLED driver is a simple switch-cap charge pump
that turns 3.3V into a high voltage drive for the OLEDs.
Each order comes with one assembled OLED module with a nice bezel and
4 mounting holes. The display is 3V logic & power so we include a
HC4050 level shifter. We also toss in a 220uF capacitor, as we noticed
an Arduino may need a little more capacitance on the 3.3V power supply
for this big display! This display does not come with header attached
but we do toss in a stick of header you can solder on. Also, the
display may come in 8-bit mode. You can change modes from 8-bit to SPI
with a little soldering, check out the tutorial for how to do so. 
Getting started is easy! We have a detailed tutorial and example code
in the form of an Arduino library for text and graphics. You'll need a
microcontroller with more than 1K of RAM since the display must be
buffered. The library can print text, bitmaps, pixels, rectangles,
circles and lines. It uses 1K of RAM since it needs to buffer the
entire display but its very fast! The code is simple to adapt to any
* Screen Dimensions: 2.9" x 1.8" x 0.2" / 74mm x 46mm x 5mm
* Screen Weight: 32g
https://learn.adafruit.com/2-7-monochrome-128x64-oled-display-module/assembly … more
|Product type||Electronics module|
If you wish to learn more about this product, please visit the manufacturer's website or contact us: firstname.lastname@example.org
Warranty 24 month Bring-in
Limited right of return
Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty
Please use our simplified warranty process to view the warranty period as well as any warranty extensions you may have purchased. This will ensure that your return or warranty case is processed quickly and effectively.
Information subject to change.
Have you tested this product? Share your opinion with the digitec community.Rate product
You're not connected to the Internet. Please check that your connection is enabled to keep browsing the site.