You're not connected to the Internet.
CHF 13.90

Adafruit Industries Adafruit 8-Channel PWM or Servo FeatherWing

A Feather board without ambition is a Feather board without FeatherWings! This is the 8-Channel PWM or Servo​ FeatherWing, you can add 8 x 12-bit PWM outputs to your FeatherWing.
Art-Nr 5998598
 approx. 7-9 days Currently > 5 piece(s) in stock at the supplier

Availability

Mail delivery

  • approx. 7-9 days
    Currently > 5 piece(s) in stock at the supplier

Collection

  • All locations: approx. 5-7 days
    Currently > 5 piece(s) in stock at the supplier

If ordered immediately.
Information subject to change.

View details

No ratings have been submitted yet for this product.

Rate this product

Description

Feather board without ambition is a Feather board without
FeatherWings! This is the 8-Channel PWM or Servo FeatherWing, you can
add 8 x 12-bit PWM outputs to your FeatherWing. Using our Feather
Stacking Headers or Feather Female Headers you can connect a
FeatherWing on top or bottom of your Feather board and let the board
take flight!

You want to make a cool robot, maybe a hexapod walker, or maybe just a
piece of art with a lot of moving parts. Or maybe you want to drive a
lot of LEDs with precise PWM output. What now? You could give up OR
you could just get our handy PWM and Servo FeatherWing. It's a lot
like our popular PWM/Servo Shield but with half the channels &
squished into a nice small portable size and works with any of our
Feather boards.

Since the FeatherWing only uses the I2C (SDA & SCL pins), it works
with any and all Feathers- ATmega32u4, ATSAM M0 or ESP8266-based. You
can stack it with any other FeatherWing or with itself (just make sure
you have each wing with a unique I2C address)

Specs:

* There's an I2C-controlled PWM driver with a built in clock. That
means that, unlike the TLC5940 family, you do not need to continuously
send it signal tying up your microcontroller, its completely free
running!
* It is 5V compliant, which means you can control it from a 3.3V
Feather and still safely drive up to 6V outputs (this is good for when
you want to control white or blue LEDs with 3.4+ forward voltages)
* 6 address select pins so you can stack up to 62 of these on a
single i2c bus, a total of 992 outputs - that's a lot of servos or
LEDs
* Adjustable frequency PWM up to about 1.6 KHz
* 12-bit resolution for each output - for servos, that means about
4us resolution at 60Hz update rate
* Configurable push-pull or open-drain output

We wrapped up this lovely chip into a FeatherWing with a couple nice
extras:

* Terminal block for power input (or you can use the 0.1" breakouts
on the side)
* Reverse polarity protection on the terminal block input
* Green power-good LED
* Two groups of 4 outputs on either side, 8 total.
* Stackable design. You'll need to pick up stacking headers and
right angle 3x4 headers in order to stack on top of this shield
without the servo connections getting in the way.
* A spot to place a big capacitor on the V+ line (in case you need
it)
* 220 ohm series resistors on all the output lines to protect them,
and to make driving LEDs trivial
* Solder jumpers for the 6 address select pins

This product comes with a fully tested and assembled wing as well as 2
pieces of 3x4 male straight header (for servo/LED plugs), a 2-pin
terminal block (for power) and a stick of 0.1" header so you can plug
into a Feather. A little light soldering will be required to assemble
and customize the board by attaching the desired headers but it is a
15 minute task that even a beginner can do.

If you want to use right-angle 3x4 headers, we also carry them in our
shop. Servos and Feather not included, but we have lots of servos in
the shop.
more

Specifications

Click 'show more' to display specifications.

General information

Manufacturer Adafruit Industries
Product type Electronics module
Item number5998598
Manufacturer no.ada-2928

Please click directly on the incorrect data to access the registration form.

Alternatively, you can register a generic error-report (wrong picture, unsuitable accessories, etc.)

Cancel

Report incorrect data

Correction suggestion

Comment

Report incorrect data

If you wish to learn more about this product, please visit the manufacturer's website or contact us: digitec@digitec.ch

Warranty & right to return

Warranty 24 month Bring-in

Limited right of return

Warranty and return

Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty

Please use our simplified warranty process to view the warranty period as well as any warranty extensions you may have purchased. This will ensure that your return or warranty case is processed quickly and effectively.

Availability

Mail delivery

 Expected delivery time: approx. 7-9 days
Currently > 5 piece(s) in stock at the supplier

Collection

All locations

 Expected delivery time: approx. 5-7 days
Currently > 5 piece(s) in stock at the supplier

If ordered immediately.
Information subject to change.

Customer questions and answers

No questions so far.

Do you have a question? Ask the digitec community.

Ask a question

Ask other customers about product properties, performance or use.

Customer ratings

This product has not yet been rated.

Have you tested this product? Share your opinion with the digitec community.

(0)
Rate product
Adafruit Industries Adafruit 8-Channel PWM or Servo FeatherWing Adafruit Industries Adafruit 8-Channel PWM or Servo FeatherWing