Add some jazz & pizazz to your project with a color touchscreen LCD.
This TFT display is big (2.8" diagonal) bright (4 white-LED backlight)
and colorful! 240x320 pixels with individual RGB pixel control, this
has way more resolution than a black and white 128x64 display. As a
bonus, this display has a resistive touchscreen attached to it
already, so you can detect finger presses anywhere on the screen.
This display has a controller built into it with RAM buffering, so
that almost no work is done by the microcontroller. The display can be
used in two modes: 8-bit and SPI. For 8-bit mode, you'll need 8
digital data lines and 4 or 5 digital control lines to read and write
to the display (12 lines total). SPI mode requires only 5 pins total
(SPI data in, data out, clock, select, and d/c) but is slower than
8-bit mode. In addition, 4 pins are required for the touch screen (2
digital, 2 analog).
We wrapped up this display into an easy-to-use breakout board, with
SPI connections on one end and 8-bit on the other. Both are 3-5V
compliant with high-speed level shifters so you can use with any
microcontroller. If you're going with SPI mode, you can also take
advantage of the onboard MicroSD card socket to display images.
(microSD card not included, but any will work)
Of course, we wouldn't just leave you with a datasheet and a "good
luck!". For 8-bit interface fans we\'ve written a full open source
graphics library that can draw pixels, lines, rectangles, circles,
text, and more . For SPI users, we have a library as well , its
separate from the 8-bit library since both versions are heavily
optimized. We also have a touch screen library that detects x, y and z
(pressure)  and example code to demonstrate all of it.
Follow our step by step guide for wiring, code and drawing. You\'ll
be running in 15 minutes 
* 2.8" diagonal LCD TFT display
* 240x320 resolution, 18-bit (262,000) color capable - our code uses
only 16-bits since its faster.
* ILI9341 controller with built in video RAM buffer
* 8 bit digital interface, plus 4 or 5 control lines (12 pins
minimum) or SPI mode with 4 or 5 SPI data/control lines (4 pins
minimum) - not including the touch screen.
* 5V compatible! Use with 3.3V or 5V logic such as an Arduino
* Onboard 3.3V @ 150mA LDO regulator
* 4 white LED backlight, transistor connected so you can PWM dim the
* 1x20 headers for easy breadboarding
* 4-wire resistive touchscreen
http://learn.adafruit.com/adafruit-2-dot-8-color-tft-touchscreen-breakout-v2 … more
|Product type||Electronics module|
If you wish to learn more about this product, please visit the manufacturer's website or contact us: firstname.lastname@example.org
Warranty 24 month Bring-in
Limited right of return
Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty
Please use our simplified warranty process to view the warranty period as well as any warranty extensions you may have purchased. This will ensure that your return or warranty case is processed quickly and effectively.
Information subject to change.
Have you tested this product? Share your opinion with the digitec community.Rate product
You're not connected to the Internet. Please check that your connection is enabled to keep browsing the site.