You're not connected to the Internet.

Adafruit Industries Adafruit 24-Channel 12-bit PWM LED Driver TLC5947 (SPI)

This chip can control 24 separate channels of 12-bit PWM output. Designed (and ideal) for LED control.
Art-Nr 5998726
 Currently unavailable. Delivery date unknown.

Availability

  • Currently unavailable. Delivery date unknown.

Information subject to change.

View details

No ratings have been submitted yet for this product.

Rate this product

Description

For all of you out there who want to control 24 channels of PWM, we
salute you! We also would like you to check out this breakout board
for the TLC5947 PWM driver chip. This chip can control 24 separate
channels of 12-bit PWM output. Designed (and ideal) for LED control,
this board is not good for driving servos. If you need to drive
servos, we have a controller for that over here [1].

Only three "SPI" pins are required to send data (our Arduino library
shows how to to use any digital microcontroller pins). Best of all,
the design is completely chainable. As long as there's enough power
for all the boards you can chain as many as you'd like, like a little
trail of blue PCBs stretching out into the sunset. Each of the 24
output's is constant-current and open drain. You can drive multiple
LEDs in series, with a V+ anode supply of up to 30V. If you want to
drive something that requires a digital input, you must use a pullup
resistor from the drive pin to your logic level to create the full
waveform.

One resistor is used to set the current for each of the outputs, the
constant current means that the LED brightness doesn't vary if the
power supply dips. We use a 3.3K resistor for about 15mA but you can
solder a thru-hole resistor over it if you'd like to change that
value. Check the TLC5947 datasheet for details on resistor-to-current
values.

We include a few extras to make this board easy to use: a durable 5V
low-dropout regulator (with reverse polarity protection in case
y'know, you plug it in backwards), a green power-good LED, four
mounting holes and a current-set resistor. A bit of 0.1" header is
also included so you can solder it on and plug into a breadboard.

To use: Power V+ with 5-30VDC, and connect ground to the common
ground. Then send 3-5V logic SPI data on DIN (data in), CLK (clock)
and LAT (latch). If you'd like to quickly turn off all the outputs,
drop the OE pin - it's pulled high by default. Our Arduino library
will get you started with blinking LEDs [2], install it and run the
example code with the noted pin configuration.

Dimensions: 25.39mm / 0.9" x 51.1mm / 2" x 4mm / 0.1"

Links:
------
[1]
http://www.play-zone.ch/de/adafruit-16-channel-12-bit-pwm-servo-driver-i2c-interface-pca9685.html
[2] https://github.com/adafruit/Adafruit_TLC5947
more

Specifications

Click 'show more' to display specifications.

General information

Manufacturer Adafruit Industries
Product type Electronics module
Item number5998726
Manufacturer no.ada-1429

Please click directly on the incorrect data to access the registration form.

Alternatively, you can register a generic error-report (wrong picture, unsuitable accessories, etc.)

Cancel

Report incorrect data

Correction suggestion

Comment

Report incorrect data

If you wish to learn more about this product, please visit the manufacturer's website or contact us: digitec@digitec.ch

Warranty & right to return

Warranty 24 month Bring-in

Limited right of return

Warranty and return

Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty

Please use our simplified warranty process to view the warranty period as well as any warranty extensions you may have purchased. This will ensure that your return or warranty case is processed quickly and effectively.

Availability

Mail delivery

 Currently unavailable. Delivery date unknown.
We do not have any information regarding the delivery date. It will be shown as soon as it's known.

Information subject to change.

Customer questions and answers

No questions so far.

Do you have a question? Ask the digitec community.

Ask a question

Ask other customers about product properties, performance or use.

Customer ratings

This product has not yet been rated.

Have you tested this product? Share your opinion with the digitec community.

(0)
Rate product
Adafruit Industries Adafruit 24-Channel 12-bit PWM LED Driver TLC5947 (SPI) Adafruit Industries Adafruit 24-Channel 12-bit PWM LED Driver TLC5947 (SPI)